Titanium plaat en plaat
• Tittanium Sheet Materials: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23
• Foarmen: Forging Sheet, Cold Rolling Sheet, Hot Rolling Sheet
• Ofmjitting:Dikte: 0.3~5mm, Breedte: 400~3000mm, Lengte: ≤6000mm
• Betingsten:Hot smeden en waarm rôljen, kâld rôle, oplossing annealed
• Noarmen:ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 ensfh
| Titanium Alloys Materiaal Common Name | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| gr7 | UNS R52400 | Ti-0.20Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
Titanium plaat en titanium plaat:Wy leverje benammen suver titaniumblêd fan Gr1, Gr2, Gr4-klassen;Foar titanium alloy sheet, Wy leverje benammen Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 en oare kwaliteiten, Se wurde produsearre op basis fan titanium plaat mei fierdere kâlde rolling;it produksjeproses fan titaniumblêd is yngewikkelder.De deformaasjekontrôle is strikter yn it proses fan rolling.Dat kin yn ferskate maten ôfsnien wurde neffens de behoeften fan 'e klant, de tiid fan levering sterk ferkoartje.
♦ Titanium Sheet Gemyske gearstalling ♦
| Klasse | Gemyske gearstalling, gewicht persintaazje (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Oare eleminten Max.elk | Oare eleminten Max.totaal | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.56.75 | 3.5 4.5 | - | - | - | - | 0.1 | 0.4 |
| gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12 0.25 | - | 0.12 0.25 | - | 0.1 | 0.4 |
| gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 3.5 | 2.0 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0,6 0,9 | 0,2 0,4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04 0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5,5 6,5 | 3.5 4.5 | - | - | - | - | 0.1 | 0.1 |
♦Titanum Alloy SheetFysike eigenskippen ♦
| Klasse | Fysike eigenskippen | |||||||
| Treksterkte Min | Yield sterkteMin (0.2%, offset) | Ferlinging yn 4D Min (%) | Reduksje fan Area Min (%) | Bend Test (radius fan mandrel) | ||||
| ksi | MPa | ksi | MPa | ＜1.8mm Yn dikten | 1.8-4.8mm In dikte | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 | 4.5T | 5.0T |
| gr7 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| gr9 | 90 | 620 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 | 2.0T | 2.5T |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 | 4.5T | 5.0T |
